BATTER-BTSX - 9 and 12 volt Battery Simulators

The BATTER-BTSX board is an electronics board that is designed to perform battery simulator functions. If used properly, it will eliminate the need for expensive replacement of batteries again and again, which would otherwise be needed to carry out the same tasks.

BATTER-BTSX is easy to install, set-up and operate. If you want to professionally power your measurement related tools, BATTER-BTSX offers the features you need. Mounted easily via four 0.125" mounting holes.

Picture to the right is our 9V battery simulation board, shown mounted in plastic enclosure (EID-1593 series enclosure soled separately). The board designed to automatically attenuate filter and regulate the input voltage 10-24V DC or AC to a stable 9V DC.

For our 110V or 220V to 12VAC, 14VAC or 16VAC power down transformer (Class 2 Type Transformers EID-BP series) click Here

Shown above 9V battery simulator with 9V Battery Clips. and enclosure (option)

Shown above battery simulator with no wire and or connectors.

INTERFACER-HIVV1 Features

• Up to 500mA output 

• +/-3% output voltage stability

• Power switch option.

• Powered from any standard power source AC or DC that is larger then 2 volts of the desired simulator voltage.

• 2 models to choose from 9V and 12

• Also, designed to operate from 12VDC car battery (9V simulator only) adapter for remote applications.

Specifications

• Input voltage 6V simulator          8-12V AC or DC

• Input voltage 9V simulator          11-16V AC or DC

• Input voltage 12V simulator        14-18V AC or DC

• Relative Output voltage stability  +/-3%

• Output current                         Up to 500mA, higher output current models are available.

• PCB material                             FR4

• Output Voltage  6V simulator       6VDC

• Output Voltage  9V simulator       9VDC

• Output Voltage  12V simulator     12VDC

• Max power consumption             10W

• Storage temperature                 40 - 70   [F]

• Operating temperature               32 - 140 [F] (0 to 60°C) @ 95% RH

• Low board DC voltage                24 [V] max

• Power indicator                         Red LED optional

• Manufactured                          100% in USA

Pricing 

* Prices, P#, SKU# and colors are subject to change without notice. 

   Additional 10% discount with student ID, USA only.

BATTER-BTS9  9V Battery voltage simulator board. Input up to 24V DC or AC output  +9VDC /0.5A

EID-B-ATTER-A009

$29.00

BATTER-BTS12  12V Battery voltage simulator board. Input up to 24V DC or AC output  +12VDC /0.5A

EID-B-ATTER-A012

$27.00

Flat configuration option addition.

EID-B-ATTER-XXFL-AT-C1

$9.99

Power switch addition.

EID-B-ATTER-A012-PSW

$3.99

  ^•