FLIPPER 5000RMS - Mixer, Rotator and Shaker

FLIPPER-5000RMS system is designed to perform three functions: rotating, mixing and wave shaking. If used properly, it will eliminate the need for three separate machines otherwise needed to accomplish the same tasks.

FLIPPER-5000RMS provides full range of features in a compact, easy-to-install, and user friendly unit. You will be able to control all functions from a conveniently mounted front panel or your PC. At all time a large Liquid Crystal Display (LCD) clearly shows the unit mode of operation.

Whether you are in the lab, field or at home, you can use the FLIPPER-5000RMS system for extended hands-off operation. No external timers are required for this device. it is equipped with an Uninterrupted Power Supply (UPS) which eliminates stoppages due to power failures.

Features

• Software package 

• Uninterrupted Power Supply (UPS)

• Set RPM, Time and other functions

• Three modes of operations Rotating, Mixing and wave Shaking (RMS)

• Many holder (clip-bars and tray) for mounting tubes petri-dish syringe and more

Specifications

• Capacity                               up to 8 Channels two units can connected to   

• Power requirement                  110V/60Hz AC

• Built in power supply                AC 110/220 [Volt], 50/60 [Hz]

• Dimension                              10” x 6” x 10”  

• Max power consumption           30 [W]

• Storage temperature               40 - 70 [F]

• operating temperature             50 - 77 [F]

• PC connection via                   EID-F-F RS232

• Internal Battery                      Rechargeable 12 [V] DC 1.2 [AH]

• Tray Inside damnations:           7.25"*4.25"

Clip size         

                        

a. AAA holds tubes sizes 0.375" to 0.468"

b. AA holds tubes sizes 0.531" to 0.656"

c. C holds tubes sizes 0.875" to 1.125"

• Process time:                          0 - 99:99 [Hours]

• Stop time:                              0 - 99:99 [Minutes]

• Delay time:                             0 - 99:99 [Hours]

• RPM (Clip Bar)                          0 - 60 Revolutions Per Minute (RPM)

• RPM (Clip Tray)                        0 - 60 Revolutions Per Minute (RPM)

• Angle (Clip Bar)                        0 - 360⁰ 

• Angle (Tray)                            0 - 45⁰ 

Stop mode:

a. Fast - stop at 60 [RPM] (tray option 20 RPM)

b. Slow - stop at the next round up decade RPM

c. RPM  - stop at the current RPM

* Pricing are subject to change without notice.

  ^•