PICER-2X4FHC/2S4FHC Signal level controlled three relays.

The PICER-2X4FH (large relays) or the PICER-2S4FHC (small relays) board is designed to perform 3 relay switching based on one input signal. If used properly, it will eliminate the need for acquiring expensive boards, which would otherwise be needed to carry out the same tasks.

The PICER-2X4FHC/2S4FHC is easy to install, setup, and operate. If you want to complete professional industrial HVAC related functions, the PICER-2X4FHC/2S4FHC offers the features you need.

Mounted easily via 0.125" mounting holes using 4-40 screws (optional) and wire via convenient conventional industrial standards cage up terminal blocks (TB).

Simply connect the boards to a 24V DC, connect the resistor network voltage divider or your remote signal to the signal input and the 3 relays turn on accordingly.

1A relay version shown above, full configuration.

12A relay version shown above, full configuration.

Please drop us a line at HVAC@eidusa.com and let us know where you use this unique board. Or, of course, if you have any adjustments deemed important--one of our OEM engineers will be happy to help you achieve them.

Figure A. shown above with small (1A) relays configuration

 Figure B. shown above with large (10A) relays configuration

1. LED (ALIVE) indication that the board functions well, blinks every second shows board is alive.

2. 1A (Figure A), 12A (figure B) Tri-relay to control HVAC; Fan, Heat, and Cold systems.

3. Tri-relay engaged LED's indictor.

4. Power and Signal input with common-ground.

5. Relay #3 outputs: (left to right) Normally Open NO, Common (C) and Normally Closed (NC).

6. Relay #2 outputs: (left to right) Normally Open NO, Common (C) and Normally Closed (NC).

7. Relay #1 outputs: (left to right) Normally Open NO, Common (C) and Normally Closed (NC).

PICER-2X4FHC/2S4FHC Features

• Can be customized to accommodate your input signals need.

• Designed to operate from 24VDC industrial standard.

Specifications

• PCB material                             FR4 (UL approved)

• Max power consumption              0.5W

• Storage temperature                  40 - 70   [F]

• Operating temperature                32 - 140 [F] (0 to 60°C) @ 95% RH

• Low board DC voltage                 9 [V]

• Power source                            12VDC +/-20%

• Mounting                                  Two/Four 0.125” holes

• Manufactured                            100% in USA

Pricing 

* Prices, SKU#, P# and colors are subject to change without notice. 

PICER-2X4FHC HVAC 3 10A relay signal controlled board

EID-PICER-2X4FHC-XX

$99.93

PICER-2S4FHC HVAC 3 1A relay signal controlled board

EID-PICER-2S4FHC-XX

$69.93

  ^•