OEM TRANSDUCER–GENERAL PURPOSE AMPLIFIER - An industrial scientific signal scaling converter, configure for your specific product, project or applications needs.

This board offers effective, state-of-the-art, reliable way to convert input voltages signal to an different scale values, while eliminating the CMRR problems utilizing custom differential input.

The GENERAL PURPOSE AMPLIFIER MODULE voltage to voltage scaler and converter, is a signal scale (Proportional) voltage or altering voltage (AC) to an scale value, both for AC and DC.

The GENERAL PURPOSE AMPLIFIER SCALING MODULE board is designed to perform voltage to scale value conversion. If used properly, it will eliminate the need for an expensive board, which would otherwise be needed to carry out the same tasks.

The GENERAL PURPOSE AMPLIFIER MODULE is easy to install, setup, and operate. If you want to do professional scientific scaling of voltage measurement related functions, The GENERAL PURPOSE AMPLIFIER MODULE offers the features you need. It can be mounted easily via two 0.125" mounting holes using 4-40 screws.

Shown above configure to convert 0 to 5 VDC to 0 to -10VDC ( Multiply by -2) while powering of +/-15VDC with Both Bias and Gain Adjustments

Simply connect the board to 3 wires +/- 15 VDC power supply, connect your input voltage source up to +/-12V to the input and our board will scale (convert) it to the new configurable output signal requirements.

Precision Scientific General Purpose Amplifier, scaler and converter

1. Power +/- 15V DC

2. Input (Left to right) IN1 (single ended) IN2 & IN3 (differential), COM.

3. Output (Left to right) COM, OUT1, OUT2 (single ended).

4. Bias multi-turn trimmer Gain adjustment.

4. second stage amplification input configuration via jumper select

4. Gain multi-turn trimmer Gain adjustment.

Mounting Option

Simply snap the Din-Rail mounted enclosure into your NEMA 4 box (enclosure) for watertight applications

EID-1593KBK Black ABS plastic instrument enclosure with Din-Rail mounting options

Plastic enclosure and Din-Rail-clip are sold separately (for demonstration only).

Board Powering--

Below are some power supply example for generating -/+ 15VDC required to power the frequency to voltage transducer.

1. One can use our POWER-AC3PNDC-15LD a Low Current Dual Output 15 & -15 Voltage DC power supply board/Regulator Interface board with step-down power transformer (110V/60HZ primary).

2. One can use our POWER-AC3PNDC-15C a Low Current Dual Output 15 & -15 Voltage DC power supply board/Regulator Interface board power of Center Tap (CT) 24VAC CT-transformer.

3. One can use our POWER-AC2PNDC-15A a Low Current Dual Output 15 & -15 Voltage DC power supply board/Regulator Interface board power of 24VAC transformer.

Note: For powering more then 2 transducer use POWER-PSD15 or Adjustable Dual Output Positive & Negative Voltage Power-Supply set to output voltage of +/-15VDC.

Specifications

• Max power consumption              0.5W

• Storage temperature                  40 - 70   [F]

• Operating temperature                32 - 140 [F] (0 to 60°C) @ 95% RH

• Power source                            +/-15VDC filtered

• Gain Adjustment                        Via trimmer

• Bias Adjustment                        Via trimmer

• Mounting                                  Two 0.125” (3.1mm) holes with centers distance of 1.1" & 2.1"

• Board dimensions                       2.025" & 1.9" (51.4mm * 48.2mm)

• Manufactured                           100% in USA

Pricing 

* Prices, SKU#, P# and colors are subject to change without notice. 

GENERAL PURPOSE AMPLIFIER MODULE An custom configurable scaling voltage scientific transducer (converter/scaler) with terminal-block (10 positions).

EID-GENERAL_AMP_XXX_YYY_ZZZ

Call

Modified Translucent blue ABS Plastic Instrument enclosures option

EID-1593KBK

$7.98

Din rail mounting mounting kit option

EID-1427DINCLIP

$4.24

  ^•