Liquid Fluxes (LF)

 

All wire and materials are in stock. Choose from variety of high grade liquid fluxes. We can custom blend to fit your manufacturing needs. Good news for the hundreds who call about "grade-A" liquid fluxes." Yes, we carry the flagship fluxes by AMTECH Inc.


Liquid Fluxes are available in the following packaging: 

  • 1-galon containers

  • 5-galon pails

  • 55-galon drums

Liquid fluxes are also available in Flux-Righters TM - for rework and touch-up. 

 


 

Water Soluble high-grade liquid fluxes:


The WS-733 water Soluble  Flux is designed for wave soldering critical electronic assemblies. The unique chemistry provides high reliability and excellent ionic cleanliness. WS-733 does not create excessive foaming in standard water cleaning systems and exhibits excellent soldering properties in large volume production without sacrificing reliability. 

 

WS-733 

  • Solids: 21 to 25%

  • Application: Spray or foam thinner #733-T


The WS-748 water Soluble Flux is designed for wave soldering critical electronic assemblies. The unique chemistry provides high reliability and excellent ionic cleanliness. During wave soldering, WS-748 has no offensive odor and gives off little fumes compared to other water-soluble formulations. WS-748 does not create excessive foaming in standard water cleaning systems and exhibits excellent soldering properties in large volume production without sacrificing reliability. 

 

WS-748 

  • Solids: 17%

  • Application: Spray or foam thinner #750-T


 

No-clean high-grade liquid fluxes:

The NC-95 is a no-clean low solid, rosin-free, halide-free organic soldering flux formulated for wave soldering of high-end multi-layer boards. it does not contain rosin and leaves practically no residue after wave soldering. It does not leave insulative residues on test pads and therefore does not cause any interference to ICT. NC-95 no-dean flux conforms to IPC-SF-818 specification. 

 

NC-95

  • Solids: 2.2%

  • Application: Spray or foam thinner #95-T


NC-98 is a no-clean flux designed with a low solids content (3.0%s), and is a halide free soldering flux formulated for wave soldering of high-end multi-layer boards. The NC-98 creates less visible residue, fear fumes and higher SIR values. It does not leave insulative residues on test pads and therefore does not cause any interference to ICT. NC-98 no-dean flux conforms far beyond the requirements of bellcore TR-TSY-000078 and IPC-SF-818 Class 3 specifications. Per IPC-SF-818 specification, the NC-98 is characterized as ORLO flux and can be used for no-dean applications. 

 

NC-98

  • Solids: 3%

  • Application: Spray or foam thinner #98-T


Special Liquid fluxes:

No-Clean NVOC-85 is formulated using water as the base. This material is a rosin and resin-free soldering flux formulated for wave soldering. It leaves very low residue after wave soldering. The No-Clean NVOC-85 flux conforms to IPC-SF-818 and European DIN 8527 specifications. Per IPC-SF-818 specification, No-Clean NVOC-85 is characterized as a LO flux and can be used for no-Clean applications. Washing is not necessary since any residual flux residues are non-corrosive and halide-free. 

 

NVOC-85

  • Solids: 2.5%

  • Application: Spray


The HAL-776 flux is used in hot air solder leveling machines. HAL-776 flux material exhibits high temperature stability and thermal conductivity with complete solubility of residue. The flux is designed for direct use from the container and needs no dilution by any other solvents. HAL-776 flux can be used on both vertical and horizontal machines. 

 

HAL-776

  • Solids: 75%

  • Application: Ver/Hor


Minimum order:

 

$300 

 

Safety:


See the material safety data sheet for the appropriate safety procedures.

 

Packaging:

  • 1-galon containers

  • 5-galon pails

  • 55-galon drums

Storage:


The expected shelf life is at least 12 months when stored in normal conditions

 

Description and SKU#

Price

Picture

Water Soluble high-grade liquid fluxes:

 

EID-AMT-NCF-WS733-1G     1-Gallon, WS733

EID-AMT-NCF-WS733-5G     5-Gallon, WS733

EID-AMT-NCF-WS733-55G   55-Gallon Drum, WS733

EID-AMT-NCF-WS748-1G     1-Gallon, WS748

EID-AMT-NCF-WS748-5G     5-Gallon, WS748

EID-AMT-NCF-WS748-5G     5-Gallon Drum, WS748

 

 

No-clean high-grade liquid fluxes:

 

EID-AMT-NCF-NC95-1G     1-Gallon, NC95

EID-AMT-NCF-NC95-5G     5-Gallon, NC95

EID-AMT-NCF-NC95-55G   55-Gallon Drum, NC95

EID-AMT-NCF-NC98-1G     1-Gallon, NC98

EID-AMT-NCF-NC98-5G     5-Gallon, NC98

EID-AMT-NCF-NC98-55G    55-Gallon Drum, NC98

 

 

Special Liquid fluxes:

 

EID-AMT-NCF-NVOC85-1G     1-Gallon, NVOC85

EID-AMT-NCF-NVOC85-5G     5-Gallon, NVOC85

EID-AMT-NCF-NVOC85-55G    55-GallonDrum, NVOC85

EID-AMT-NCF-HAL776-1G      1-Gallon, HAL776

EID-AMT-NCF-HAL776-5G      5-Gallon, HAL776

EID-AMT-NCF-HAL776-55G     55-Gallon Drum, HAL776