Industrial
Electrical Enclosure EID-1418 Series:
EID-1418
Single Door
Freestanding Single or
Dual Access
Series Enclosures - NEMA 12
EID-1418
Single Door Freestanding
Single or Dual Access
Series Enclosures - NEMA 12
Application:
-
Designed to house electrical,
electronic, hydraulic or pneumatic controls with provision
for panel mounting or rack mounting of equipment.
-
Provides a degree of
protection from falling dirt, dust, oil and water.
-
Available with front access
only or both front and rear access.
-
A variety of inner panels,
rack mounting rails and swing out frames are available to
provide flexibility in mounting arrangements.
Standards:
-
UL 508 Type 12
-
CSA Type 12
-
Complies with
Construction:
-
Formed 12 gauge steel.
-
Smooth, continuously welded
seams without knockouts, cutouts or holes.
-
Lifting eyes provide for easy
enclosure handling.
-
Doors are supported with heavy
gauge continuous hinges.
-
Doors are secured with a three
point latch and operated with a key locking automotive type
handle.
-
Latch rods are equipped with
rollers for easier door closing.
-
Oil resistant gaskets are
permanently secured .
-
Provision for light kit
mounting.
-
Mounting channels are welded
on the inside of the enclosure for mounting of optional
inner panels or rack equipment rails.
-
A grounding stud is provided
in the enclosure and a bonding stud is provided on the door.
-
A literature pocket is
provided for the inside of the door (Two pockets are
provided for dual access units).
Finish:
-
Cover and enclosure are
finished in recoatable smooth ANSI 61 gray powder coating on
the outside, with white powder coating on the inside.
-
Optional inner panels, rails,
frames and supports are available in white powder coating.
Accessories:
Single Access
Part No. |
A |
B |
C |
F |
G |
Optional
Full Panel¹ |
Ship
Wt. lbs |
EID-1418TW18 |
60.06 |
24.06 |
18.06 |
32.03 |
23.13 |
EID-760TWFW |
210 |
EID-1418W18 |
72.06 |
24.06 |
18.06 |
38.03 |
29.13 |
EID-772WFW |
246 |
EID-1418X18 |
72.06 |
30.06 |
18.06 |
38.03 |
29.13 |
EID-772XFW |
285 |
EID-1418Y18 |
72.06 |
36.06 |
18.06 |
38.03 |
29.13 |
EID-772YFW |
325 |
EID-1418YW20 |
90.06 |
24.06 |
20.06 |
47.03 |
38.13 |
EID-790YWFW |
313 |
EID-1418YY20 |
90.06 |
36.06 |
20.06 |
47.03 |
38.13 |
EID-790YFW |
406 |
EID-1418TY24 |
60.06 |
36.06 |
24.06 |
32.03 |
23.13 |
EID-760TYFW |
325 |
EID-1418W24 |
72.06 |
24.06 |
24.06 |
38.03 |
29.13 |
EID-772WFW |
300 |
EID-1418X24 |
72.06 |
30.06 |
24.06 |
38.03 |
29.13 |
EID-772XFW |
335 |
EID-1418Y24 |
72.06 |
36.06 |
24.06 |
38.03 |
29.13 |
EID-772YFW |
370 |
EID-1418YY24 |
90.06 |
36.06 |
24.06 |
47.03 |
38.13 |
EID-790YFW |
440 |
EID-1418W30 |
72.06 |
24.06 |
30.06 |
38.03 |
29.13 |
EID-772WFW |
355 |
EID-1418Y30 |
72.06 |
36.06 |
30.06 |
38.03 |
29.13 |
EID-772YFW |
420 |
EID-1418W36 |
72.06 |
24.06 |
36.06 |
38.03 |
29.13 |
EID-772WFW |
400 |
EID-1418Y36 |
72.06 |
36.06 |
36.06 |
38.03 |
29.13 |
EID-772YFW |
465 |
EID-1418YY36 |
90.06 |
36.06 |
36.06 |
47.03 |
38.13 |
EID-790YFW |
525 |
¹
Refers to optional full height/full width panels. Depth panels
and half height width panels are also available.
Dual Access
Part No. |
A |
B |
C |
F |
G |
Optional
Full Panel¹ |
Ship
Wt. lbs |
EID-1418WD24 |
72.06 |
24.06 |
24.06 |
38.03 |
29.13 |
EID-72WFW |
325 |
EID-1418XD24 |
72.06 |
30.06 |
24.06 |
38.03 |
29.13 |
EID-772XFW |
424 |
EID-1418YD24 |
72.06 |
36.06 |
24.06 |
38.03 |
29.13 |
EID-772YFW |
474 |
EID-1418YYD24 |
90.06 |
36.06 |
24.06 |
47.03 |
38.13 |
EID-790YFW |
540 |
EID-1418WD30 |
72.06 |
24.06 |
30.03 |
38.03 |
29.13 |
EID-772WFW |
375 |
EID-1418WD36 |
72.06 |
24.06 |
36.06 |
38.03 |
29.13 |
EID-772WFW |
425 |
EID-1418YD36 |
72.06 |
36.06 |
36.06 |
38.03 |
29.13 |
EID-772YFW |
495 |
EID-1418YYD36 |
90.06 |
36.06 |
36.06 |
47.03 |
38.13 |
EID-790YFW |
555 |
¹
Refers to optional full height/full width panels. Depth panels
and half height width panels are also available.
Maximum Useable Depth-Single
access only. From inside surface of front door to front face of
full width panel. Inner panel in full back position.
Enclosure Depth (In.) |
Maximum Usable Depth |
18.06 |
17.80 |
20.06 |
19.80 |
24.06 |
23.80 |
30.06 |
29.80 |
36.06 |
35.80 |
|