POWER-AC2PNDC-5A/B.  24VAC to Low Current Dual Output 5 & -5 Voltage DC power supply board/Regulator Interface board.

 

the POWER-AC2PNDC-5A/B are an Electronics board that allows you to connect Low voltage 24VAC or 17 to 32VAC on one side of the board (AC1 & AC2)and get dual low current regulated voltages, 5VDC and -5VDC  on the other side (+V & -V corresponding). Every industrial application designer should have a few of these boards handy. The boards will allow you to easily power all your Industrial Op-Amp transducers. The Terminal Block TB connector is included and makes it easy to use. 

 

The POWER-AC2PNDC-5A/B. board is designed to convert low current 24 VAC to stabilize +/- 5V DC. If used properly, it will eliminate the need for expensive industrial power supplies, which would otherwise be needed to carry out the same task.

 

AC3PNDC-5A/B is easy to install, setup and operate. If you want to  professionally power your HVAC products, POWER-AC2PNDC-5A/B offers the features you need. Mounted easily via tow 0.125" mounting holes.

 

The board is designed to attenuate, filter and regulate low current low voltage AC to stable +/-5V DC.

 

For our line of transformers click Here

 

 

     

 

Standard Board Models A (left) & B (right) for easy wiring configuration

 

Basic operation of the voltage regulator board

 

The half diodes bridge D1-D2, together with the capacitor C1, C3 will convert input 24VAC voltages to dual DC voltages.

 

The other side of the diodes bridge drives the low current voltage regulators U1 and U2. The voltage regulators are the main component of this regulators. The POWER-AC2PNDC-5A/B board typically has the ability to drive currents up to 80mA. For maximum voltage regulation, adding capacitors C2 and C4 correspondingly in parallel between the common leg and the output. This eliminates any high frequency AC voltage that could otherwise combine with the output voltage.

 

 

 

24VAC convert to low current -5VDC and +5VAC with common ground

 

 

       

 

         

 

Figure A above shown model A (left) and B (right)

 

1. Output +/- 5V DC.

2. Input 24V AC

3. LED power indicator.

 

 

Mounting Option

 

Simply snap the Din-Rail mounded enclosure into your NEMA 4 box (enclosure) for watertight applications

 

 

The board Model A shown above mounted in EID-1593KBK black ABS plastic instrument enclosure with Din-Rail mounting options

 

 

The board Model B shown above mounted in EID-1593KBK black ABS plastic instrument enclosure with Din-Rail mounting options

 

 

Plastic enclosure and Din-Rail-clip are sold separately (for demonstration only).

 

 

POWER-AC2PNDC-5A/B Features

 

  • Up to 80mA output.

  • +/-5% voltage stability.

  • Power switch option.

  • Generally powered from 24VAC or VAC that is larger then 2 volts of the desired +/-X VDC output voltage.

Specifications

  • Input voltage                           24V AC

  • Relative Output voltage stability  +/-5%

  • Output current                         Up to 80mA, higher output current models are available.

  • PCB material                             FR4

  • Output Voltage                         +/-5VDC

  • Max power consumption             < 1W

  • Storage temperature                 40 - 70   [F]

  • Operating temperature               32 - 140 [F] (0 to 60°C) @ 95% RH

  • Low board DC voltage                30[V] max

  • Manufactured                           100% in USA

Pricing 

 

* Prices, P#, SKU# and colors are subject to change without notice. 

  

Description and SKU#

Price

Picture

24VAC to 5VDC and  -5VDC PS Low current Input up to 24V AC, outputs  +5V /80mA & -5V /80mA

 

P# EID-POWER-PSD-AC2PNDC5A

 

 

 

 

 

27.93

 

 

Model A

 

24VAC to 5VDC and  -5VDC PS Low current Input up to 24V AC, outputs  +5V /80mA & -5V /80mA

 

P# EID-POWER-PSD-AC2PNDC5B

 

 

 

 

27.93

 

 

Model B

 

  •