• Designed for harsh industrial environments or outdoor applications (security, outdoor wireless, controls, In-Line Amplifiers, Signal Conditioners, Transmitters, Transducers etc.)

• Ideally suited for mounting industrial interface printed circuit boards, panels or DIN rail mounted components (see photo features below for details).

• Designed for wall mounting - interior is secure as lid screws are behind the lid. Can be made more secure if wall mounted with security screws (tamper resistant screws).

• Satin texture finish with smooth recessed surface on lid for a membrane keypad or label

• Standoffs molded in the interior of the lid & enclosure - designed for #6 x 1/4" self tapping screws (our part number EID-1598ATS100)

• Choice of two materials:

  • General purpose ABS plastic (material carries a UL flammability rating of UL94 HB). Not recommended for outdoor use.

  • Polycarbonate (material carries a UL flammability rating of UL94 V0 @ 3mm) - Recommended for outdoor use.

• Color is a light gray (RAL 7035) to help keep heat absorption down.

• Gasket lid with two piece "tongue & groove" construction provides protection against access of oil, dust and water.

• Gasket is one piece using high temperature U.L. listed - silicone rubber gasket material.

• Designed to meet IP 67 & NEMA 4, 4X, 12 & 13 ratings.

• Polycarbonate version is UL 508 listed (File # E65324).

• Flanged lid is secured with self captivating - M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly & disassembly). All stainless steel hardware to avoid corrosion caused by dissimilar metals. See photo features below.

• Flanged lid screws are self captivating (lid holes are threaded with the first installation of lid screws).

• Internal features are maximized for mounting options:

  • Internal DIN rail mounting tabs - molded into lid - (except smaller EID-1555CF22 & EID-1555CF42 enclosures)...

  • Options vary with size (see drawings).

  • Standoffs (#6 self tapping screws) for P.C. board or inner panel mounting in all sizes

ABS Plastic Part Number	Polycarbonate Part Number	Units	Length	Width	Height (Includes Lid)
EID-1555CF22GY	EID-1555C2F22GY	mm	120	66	42
		inches	4.7	2.6	1.65
EID-1555CF42GY	EID-1555C2F42GY	mm	120	66	62
		inches	4.7	2.6	2.44
EID-1555FF17GY	EID-1555F2F17GY	mm	120	91	37
		inches	4.7	3.6	1.47
EID-1555FF42GY	EID-1555F2F42GY	mm	120	91	62
		inches	4.7	3.6	2.44
EID-1555JF17GY	EID-1555J2F17GY	mm	159	91	37
		inches	6.3	3.6	1.47
EID-1555JF42GY	EID-1555J2F42GY	mm	159	91	62
		inches	6.3	3.6	2.44

 

Features (by photo):

 

Enclosure Top (smooth recessed surface for a membrane keypad or label)	Lid Interior (standoffs molded in - varies with size see drawings for details)

 

Stainless steel inserts & lid screws. No corrosion caused by dissimilar metals.	Lid holes & stainless steel inserts are outside of the gasket seal.

 

Accessories:

 

panels: